# Makefile.in generated by automake 1.10.1 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



pkgdatadir = $(datadir)/conky
pkglibdir = $(libdir)/conky
pkgincludedir = $(includedir)/conky
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i586-blackpanther-linux-gnu
host_triplet = i586-blackpanther-linux-gnu
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/pkg.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)"
NROFF = nroff
MANS = $(man_MANS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /root/RPM/BUILD/conky-1.6.1/missing --run aclocal-1.10
AMTAR = ${SHELL} /root/RPM/BUILD/conky-1.6.1/missing --run tar
AR = ar
AUTOCONF = ${SHELL} /root/RPM/BUILD/conky-1.6.1/missing --run autoconf
AUTOHEADER = ${SHELL} /root/RPM/BUILD/conky-1.6.1/missing --run autoheader
AUTOMAKE = ${SHELL} /root/RPM/BUILD/conky-1.6.1/missing --run automake-1.10
AWK = gawk
Audacious_CFLAGS = -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12  
Audacious_LIBS = -laudacious -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -lglib-2.0  
BMPx_CFLAGS = 
BMPx_LIBS = 
BUILD_ARCH = Linux 2.6.24.2-laptop-1bP (i686)
BUILD_DATE = Sun Jan  4 20:06:04 CET 2009
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fomit-frame-pointer -march=i586 -mtune=pentiumpro -fasynchronous-unwind-tables -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12   -I/usr/include/libxml2           -I/usr/include/freetype2   -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include   -Wall -W
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fomit-frame-pointer -march=i586 -mtune=pentiumpro -fasynchronous-unwind-tables
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DSYMUTIL = 
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
F77 = g77
FFLAGS = -O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fomit-frame-pointer -march=i586 -mtune=pentiumpro -fasynchronous-unwind-tables
GLib2_CFLAGS = -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  
GLib2_LIBS = -lglib-2.0  
GREP = /bin/grep
HAVE_PKGCONFIG = yes
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LDFLAGS =  -Wl,-O1
LIBICONV = 
LIBOBJS = 
LIBS =  -laudacious -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lgmodule-2.0 -lglib-2.0   -lm -lxml2   -lcurl   -liw  -lX11   -lXext   -lXdamage -lXfixes   -lXft -lXrender -lfontconfig -lfreetype -lz -lX11   -lglib-2.0  
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBICONV = 
LTLIBOBJS = 
MAKEINFO = ${SHELL} /root/RPM/BUILD/conky-1.6.1/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
NMEDIT = 
OBJEXT = o
PACKAGE = conky
PACKAGE_BUGREPORT = brenden1@users.sourceforge.net
PACKAGE_NAME = Conky
PACKAGE_STRING = Conky 1.6.1
PACKAGE_TARNAME = conky
PACKAGE_VERSION = 1.6.1
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
RANLIB = ranlib
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
VERSION = 1.6.1
X11_CFLAGS =  
X11_LIBS = -lX11  
XDamage_CFLAGS =  
XDamage_LIBS = -lXdamage -lXfixes  
XMKMF = 
XMMS2_CFLAGS = 
XMMS2_LIBS = 
X_CFLAGS = 
X_EXTRA_LIBS = 
X_LIBS = 
X_PRE_LIBS = 
Xext_CFLAGS =  
Xext_LIBS = -lXext  
Xft_CFLAGS = -I/usr/include/freetype2  
Xft_LIBS = -lXft -lXrender -lfontconfig -lfreetype -lz -lX11  
abs_builddir = /root/RPM/BUILD/conky-1.6.1/doc
abs_srcdir = /root/RPM/BUILD/conky-1.6.1/doc
abs_top_builddir = /root/RPM/BUILD/conky-1.6.1
abs_top_srcdir = /root/RPM/BUILD/conky-1.6.1
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 = g77
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = /usr/bin
build = i586-blackpanther-linux-gnu
build_alias = i586-blackpanther-linux-gnu
build_cpu = i586
build_os = linux-gnu
build_vendor = blackpanther
builddir = .
datadir = /usr/share
datarootdir = ${prefix}/share
db2x_manxml_cmd = 
db2x_xsltproc_cmd = 
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = /usr
host = i586-blackpanther-linux-gnu
host_alias = i586-blackpanther-linux-gnu
host_cpu = i586
host_os = linux-gnu
host_vendor = blackpanther
htmldir = ${docdir}
includedir = /usr/include
infodir = /usr/share/info
install_sh = $(SHELL) /root/RPM/BUILD/conky-1.6.1/install-sh
libcurl_CFLAGS =  
libcurl_LIBS = -lcurl  
libdir = /usr/lib
libexecdir = /usr/lib
libxml2_CFLAGS = -I/usr/include/libxml2  
libxml2_LIBS = -lxml2  
localedir = ${datarootdir}/locale
localstatedir = /var/lib
mandir = /usr/share/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s&^&&
psdir = ${docdir}
sbindir = /usr/sbin
sharedstatedir = /usr/com
srcdir = .
sysconfdir = /etc
target_alias = i586-blackpanther-linux-gnu
top_builddir = ..
top_srcdir = ..
xsltproc_cmd = xsltproc
#DOCS = conky.1 docs.html variables.html config_settings.html
man_MANS = conky.1
sysconf_SYSCONFS = conky.conf
EXTRA_DIST = $(DOCS) conky.conf command_options.xml config_settings.xml docgen.sh docs.xml variables.xml variables.xsl config_settings.xsl
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
	done
uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(MANS)
installdirs:
	for dir in "$(DESTDIR)$(man1dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool \
	mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-man

install-dvi: install-dvi-am

install-exec-am:

install-html: install-html-am

install-info: install-info-am

install-man: install-man1

install-pdf: install-pdf-am

install-ps: install-ps-am

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-man

uninstall-man: uninstall-man1

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	distclean distclean-generic distclean-libtool distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-man1 \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	uninstall uninstall-am uninstall-man uninstall-man1


#clean-am: clean-generic mostlyclean-am
#	rm -f docs.mxml
#	rm -f conky.1
#	rm -f variables.html
#	rm -f config_settings.html

#conky.1: command_options.xml config_settings.xml docs.xml variables.xml
#	${db2x_xsltproc_cmd} -s man ${srcdir}/docs.xml -o docs.mxml
#	${db2x_manxml_cmd} docs.mxml
#	${xsltproc_cmd} http://docbook.sourceforge.net/release/xsl/current/html/docbook.xsl ${srcdir}/docs.xml > docs.html
#	man ./conky.1 | col -b > README
#	mv README ${top_srcdir}
#	xsltproc ${srcdir}/variables.xsl ${srcdir}/variables.xml > variables.html
#	xsltproc ${srcdir}/config_settings.xsl ${srcdir}/config_settings.xml > config_settings.html

conky.1:

# vi:set ts=8 sw=8 noet ai nocindent syntax=automake:
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
